Specifications

Monitor setup

Adjust the color of

monitor here.

1. Monitor brightness adjustment

– Color and temperature setting 6500K (D65)

– Contrast adjustment

– Brightness adjustment

Adjust it, referring to the Operators Manual of the display monitor.

33_5

5060

Explanation

• When adjusting the monitor, carry out the monitor brightness adjustment and check the color

matching between the monitor and the test print from the viewpoint of actual operation.

• When installing the machine or carrying out the monitor adjustment from the first step, carry

out the monitor adjustment by selecting [All].Also, when you want to adjust the color of the

monitor a little, adjust it by selecting [Only Color Adjustment Pattern].

• As for the paper type selection, you can choose any paper type if the setup is completed.

• Monitor color adjustment procedure

Checking the color of the whole monitor comparing with the test print → Contrast →

Brightness → Color adjustment after adjusting the contrast and brightness → Color adjustment

of highlight area → Color adjustment of shadow area

• After finishing the monitor color adjustment, make a print from media and check the color

matching between the print and the PJP screen.If the adjustment is necessary, readjust the color

of the whole monitor.

Note

• When outputting the test print for the monitor adjustment, the DSA correction is not effective,

but the temperature change correction and balance memory correction of paper setup are

effective.

• When the monitor setup is completed, the file of the gamma data is updated. Also the file of the

gamma data is held in the HDD and the file is sent to the video board.

• Refer to the Operator's Manual - Additional Operations & Setup Manual - "Adjusting the color

of the image on the display monitor [Monitor Setup]" for details of the monitor setup.