User`s manual

5-16
Microtek User's Guide for Windows
The appearance of the Scan Material Status icon changes,
depending on whether your scan material is reflective,
positive, or negative.
The positive and negative icons become active only if you're
using a Transparent Media Adapter with your flatbed scanner,
or if you're using a transparency / slide scanner such as the
ScanMaker 45t or ScanMaker 35t.
• If you're scanning a reflective (such as a photo or print),
the Scan Material status icon appears in the form shown
below. When you click on the icon and hold down the
mouse, you'll see the Reflective option checked.
Appearance of the Scan Material Status
icon when scanning reflective materials.
• If you're scanning a positive transparency or filmstrip, the
Scan Material Status icon appears in the form shown
below. When you click on the icon and hold down the
mouse, you'll see the Positive Transparency option
checked.
• If you're scanning a negative transparency or filmstrip,
the Scan Material status icon appears in the form shown
below. When you click on the icon and hold down the
mouse, you'll see the Negative Film option checked.
Appearance of the Scan Material Status icon
when scanning a negative transparency or
filmstrip.
Appearance of the Scan Material Status icon
when scanning a positive transparency or
filmstrip. Notice the perforations on the top and
bottom of the icon (characteristic of slides) to
distinguish it from the reflective icon.