User`s manual

ScanMaker 35t Plus Specifications (PC)
Media:
Color and black-and-white slides and negatives
Image Sensor:
Linear array CCD with daylight fluorescent lamp.
Scanning Modes:
30-bit color internal process (24-bit color external process);
10-bit grayscale internal process (8-bit grayscale external
process);
1-bit black and white; 12 built-in halftones.
Scanning Area:
35 mm (+/- 1.5 mm) x 35 mm
2686 x 2686 pixels
Maximum Resolution:
Original:
1950 x 3900 pixels
Interpolated:
3900 x 3900 pixels
Image Controls
Brightness Settings:
From -18% to +700% in 240 levels; each step at 3%
increments.
Contrast Settings:
From -42% to +49% in 14 increments; each step at 7%.
Resolution Settings:
From 25 % to 100% in 1% per step in gray-scale and color
modes (software definable).
Scanning Speed (35 mm/line):
2.8 milliseconds to 64 milliseconds per line (depending on
the scanner settings)
Scanning times vary greatly, depending on image
dimensions, resolution, memory capacity, disk access
speed, and display time.
Interface:
Adaptec AVA-1502AE SCSI interface card
Voltage:
AC 100V to 120V (North America)
AC 200V to 240V (Europe)
Power Consumption:
AC 100V to 120V: 1.0 A Max.
AC 200V to 240V: 0.5 A Max.
Dimensions (L x W x H):
9.84" x 7" x 5.1"
Environment:
Operating temperature:
10° to 40°C ( 50° to 104°F)
Storage temperature:
-10° to 60°C ( 14° to 140°F)
Relative humidity: 20% to 80%