User`s manual

Specifications for Flatbed Scanners (PC)
Media:
Reflective color or black-and-white originals
Image Sensor:
• ScanMaker V600, V310, and V300: Linear array CCD
with cold cathode lamp.
• ScanMaker E3 Plus: Linear array CCD with daylight
fluorescent lamp.
Scanning Modes:
• ScanMaker V600, E3 Plus, and V310:
Single scanning pass; 30-bit color internal process (24-
bit color external process); 10-bit grayscale internal
process (8-bit grayscale external process); 1-bit black
and white; 12 built-in halftones.
• ScanMaker V300: Single scanning pass; 24-bit color;
8-bit grayscale; 1-bit black and white; 12 built-in
halftones.
Scan Frame:
• ScanMaker V600, V310, and V300: 8.5" x 11.69"
• ScanMaker E3 Plus: 8.5" x 13.5"
Optical Resolution:
• ScanMaker V600:
600 dpi horiz. x 1200 dpi vert.
• ScanMaker E3 Plus, V310, and V300:
300 dpi horiz. x 600 dpi vert.
Interpolated Resolution:
• ScanMaker V600:
9600 dpi horiz. x 9600 dpi vert.
• ScanMaker E3 Plus, V310, and V300:
4800 dpi horiz. x 4800 dpi vert.
Scan Frame Selections:
• ScanMaker V600, V310, and V300:
From 1/8" to 11.69" in 2-pixel increments
• ScanMaker E3 Plus, V310, and V300:
From 1/8" to 13.5" in 2-pixel increments
Image Controls Brightness Settings:
From -100% to +100% in 1% increments.
Contrast Settings:
From -42% to +49% in 7% increments.
Exposure Time Selections:
From -18% to +747% in 3% increments.
Resolution Settings:
• ScanMaker V600:
From 6 dpi to 600 dpi in 6-dpi increments; 600 dpi to
1200 dpi in 12-dpi increments; 1200 dpi to 2400 dpi in
24-dpi increments; 2400 dpi to 4800 dpi in 48-dpi
increments; 4800 dpi to 9600 dpi in 96-dpi increments.
• ScanMaker E3 Plus, V300, and V310:
From 3 dpi to 300 dpi in 1% increments; 300 dpi to 600
dpi in 2% increments; 600 dpi to 1200 dpi in 4%
increments; 1200 dpi to 2400 dpi in 8% increments;
2400 dpi to 4800 dpi in 16% increments.
Scanning Speed:
• ScanMaker V600: 4.5 milliseconds per line for line art,
halftone, and gray, 16 milliseconds per line for color
(speed measured at 600 dpi)
• ScanMaker E3 Plus: 3 milliseconds per line for line art,
halftone, and gray, 7 milliseconds per line for color (speed
measured at 300 dpi)
• ScanMaker V310 and V300: 2.5 milliseconds per line for
line art, halftone, and gray, 6 milliseconds per line for
color (speed measured at 300 dpi)
Scanning times vary greatly, depending on image
dimensions, resolution, memory capacity, disk access
speed, and display time.
Interface: Enhanced Parallel Port (EPP)
Voltage:
AC 100V to 120V (North America)
AC 100V to 240V (Europe)
Power Consumption:
• ScanMaker V600:
AC 100V to 240V: 1A Max.
47 to 63 Hz; 30 watts
• ScanMaker E3 Plus:
AC 100V to 120V: 1A Max.
AC 100V to 240V: 1A Max.
47 to 63 Hz; 38 watts
• ScanMaker V310:
AC 100V to 240V: 0.5A Max.
47 to 63 Hz; 25 watts
• ScanMaker V300:
AC 100V to 240V: 0.5A Max.
47 to 63 Hz; 21 watts
Dimensions (L x W X H):
• ScanMaker V600:
17.3" x 11.5" x 3.2"
• ScanMaker E3 Plus:
20.2" x 13.5" x 4.6"
• ScanMaker V310 and V300:
17.3" x 11.7" x 3.54"
Environment:
• Operating temperature:
10° to 40°C (50° to 104°F)
• Storage temperature:
-10° to 60°C (14° to 140°F)
• Relative humidity:
20% to 80%
• Storage temperature:
-10° to 60°C (14° to 140°F)