Installation guide

ManualsBrandsMicrotek ManualsComputer equipmentScanMaker 8700

3. On the

Driver Driver

Driver tab, click the

Reinstall Driver Reinstall Driver

Reinstall Driver button.

4. A series of dialog boxes will appear one at a time --

follow the instructions on the screen as shown below,

and then click

Next Next

Next respectively.

5. When the driver has been successfully updated, a dialog

box will prompt this message: “

Windows hasWindows has

Windows has

finished installing an updated driver for yourfinished installing an updated driver for your

finished installing an updated driver for your

hardware devicehardware device

hardware device”. Open the

System PropertiesSystem Properties

System Properties -

Device ManagerDevice Manager

Device Manager dialog box (Step 1 and 2), then click

the plus (+) sign adjacent to the

Imaging Device. Imaging Device.

Imaging Device. The

scanner name and model appears on the list -- this

means that Windows has detected and re-installed your

device successfully.

Supplementary steps to

activate your FireWire scanner

on Windows 98 SE

1. Open the

System PropertiesSystem Properties

System Properties dialog box by doing the

following in succession:

StartStart

Start,

SettingsSettings

Settings,

ControlControl

Control

PanelPanel

Panel, and then double-click the

System System

System icon.

2. From the

System PropertiesSystem Properties

System Properties, select the

DeviceDevice

Device

Manager Manager

Manager tab, then double-click

[?] IEEE 1394 SBP2[?] IEEE 1394 SBP2

[?] IEEE 1394 SBP2

Device Device

Device to open its

Device properties Device properties

Device properties dialog box.

Click

BrowseBrowse

Browse

to locate

C:\WINDOWS\INF,

and then

click

Next Next

Next (where

C:\WINDOWS is

your system folder).