Installation guide

6
Position films (or slides)
inside the template window
(flip side up)
2. To scan slides or films, you will need to place the
Transparency Template on top of scanner bed as
illustrated below
::
::
:
3. Place films (or slides) on the scanner bed by locating
them within the template window area, then carefully
pull down the FilmView cover.
Position template
with the window
end pointed
toward the front
panel
4. Then follow the procedures (Steps 2, 3, and 5) in
scanning photos. For Step 4, select film (for scanning
positive film) as your Original.
NOTE : For more details on scanning, refer to Microtek’s
Step-by-Step Tutorial guide included in your package.
Choose “Positive
Film” if original is
slide or positive
film
Choose “Negative
Film” if originals are
filmstrips
2. Scan text document
for editing
The Optical Character Recognition (OCR) is a
feature of ScanWizard 5 that converts scanned
documents into text file format. Output may be
saved as file or immediately sent to your word
processing application for further editing.
NOTE : You can also perform OCR scanning with the one
touch OCR button provided in the scanner front panel (see
Section, “Smart scanning with one-touch buttons”).
1. Place the text document (text side down) on the
scanner bed, then launch ScanWizard 5.
2. Click the following buttons and select the following
options if you are scanning text document for OCR
purposes:
3. Click and hold the Scan to button. When the options
menu appears, select OCR.
OriginalOriginal
OriginalOriginal
Original:
Select Text Document.
Scan TScan T
Scan TScan T
Scan T
ypeype
ypeype
ype:
Only Black & White option is
available if you selected Text
Document as your Original
(previous step).
PurposePurpose
PurposePurpose
Purpose:
Select OCR Text.
NOTE : When scanning colored documents, you must
select: Photo and use either True Color/Web Color unless
B/W is the chosen output.