User`s guide

6-16 Microtek ScanWizard 5
Color Matching Setup
To keep color consistency between the scanner, monitor, and printing device,
ScanWizard 5 applies Kodak CMS (Color management system) with ICC
(International Color Consortium) profile standards. For more information on
Color Management System, see Appendix C.
Color Matching Set Up command lets you select the correct ICC profile for
matching with your color monitor and color printer.
When you install ScanWizard 5, the default profiles of color monitor and printer
are set to sRGB. You may, however, update your settings from this command.
Monitor
This feature lets you select type of color monitor that is used for displaying RGB
data. The monitor profile will be applied only when “Displaying using monitor
compensation” option is checked.
Note: If the available monitor types do not include the one you have, select Generic P22
or Generic EBU. These two profiles are suitable for most of the monitors.