User`s guide

6-6 Microtek ScanWizard 5
The Scanner Menu
The Scanner Menu lets you:
• Show your scanner model or select a scanner if you have multiple scanners
• Get information about your scanner
• Get information about the SCSI chain
Scanner Model
The top of the scanner menu displays the scanner model you're using and its
Scanner ID. If you have multiple scanners on your system, all the scanners are
shown with their respective Scanner IDs, and the current scanner is indicated by
a check.
Only one scanner can be accessed at a time. To switch among various scanners,
select the scanner to be used.
Some scanner models include multiple scanning lens, one for high-resolution
scanning (for specific area) and the other for low-resolution (for general use). If
the multiple lens scanner is detected, there will be a sub-menu for lens selection.
Choose either one that suites you.
Get Current Scanner Info
This command provides information about your current scanner. When you
choose this command, a dialog box appears showing the scanner model,
Scanner ID number, and firmware version.
The scanner with its Scanner ID is
displayed. The current scanner is
marked by a check.