User`s guide

5-14 Microtek ScanWizard 5
Important scanning notes
If you are not familiar with the scanning process, you may wish to review the
preceding pages first on the individual scanning tasks to get a feel for the
software and how it works. Also, if some of the concepts discussed in these
pages are not familiar to you, refer to Chapter 6, Reference section of the manual
for more detailed discussion.
For previews and scans
Using the Scan Frame tool
Familiarize yourself with the Scan Frame tool. This tool is used to crop preview
images for final scanning. You can also use the Scan Frame tool to create
multiple scan frames, and with the creation of multiple scan frames, this means
you are actually creating duplicate scan jobs (based on the current scan job).
Each scan frame (and its related scan job) can have its particular settings, so that
one scan job can be in grayscales; another in color with a certain brightness
setting; and yet another in color with a filter applied to it. You can create
multiple scan frames in a single image, or you can have several images and have
several scan frames spread out among the images.