User`s guide

3-8 Microtek ScanWizard 5
Step 6 Adjust Button
The screen tip on this button suggests you may
adjust (color toning, image brightness, etc.) the
preview image to provide an enhanced output
image. Click on the
Adjust button and the SW
5-Standard image correction tool panel displays.
Adjust image appearance by dragging the pellet
button of each tool along its grooves. Observe
the live update taking place with the preview
image as you reposition each pellet.
Click anywhere outside the image correction tool
panel to exit the panel, or press the
Enter key.
The pointer then auto points to the final
scanning button (Step 7).
Step 7 Final Scanning Buttons
This is the last step of your scanning tutorial
session where the final scanning is performed. The final scanning button
designated function will differ depending on how the SW 5-Standard was
launched as explained below.
Scan button This is the resulting button (default) when SW 5-Standard is
launched from an image processor.
Scan to button This is the resulting button (default) when SW 5-Standard is
launched from program manager or from scanner located
“
Go” or “Scan” start button, whichever is available.
Copy button This is the resulting button (default) when SW 5-Standard is
remotely launched from scanner “
Copy” start button.
E-mail button This is the resulting button (default) when SW 5-Standard is
remotely launched from scanner “
E-mail” start button.