User`s guide

Tutorial 3-5
3
1
2
4
Running from Start Menu
To launch SW 5-Standard from Start menu, click on-
1. Start button
2. Program
3. Microtek
ScanWizard 5 for
Windows
4. ScanWizard 5
Running from Scanner Located Start Buttons
If your scanner is equipped with either the "Go", or a combination of "Scan",
"
Copy", and "E-mail" start buttons, you may remotely launch SW 5-Standard
from the scanner by pressing any of the available buttons.
Note that these start buttons start SW 5-Standard as if it were launched from
Start menu. Hence, all SW 5-Standard functions are supported, but the “
Copy”
and “
E-mail” start buttons will cause the final scanning button to default at
“
Copy” and “E-mail” respectively. That is -
“
Copy” SW 5 Standard is ready to perform final scan and send output image to
your printer.
“
E-mail” SW 5 Standard is ready to perform final scan, then
save output image to a file. It then opens and
attaches the image to your e-mail editor.
Running from ScanWizard 5 Assistant Buttons
The "Scan", "Copy", and "E-mail" buttons of the desktop
Assistant buttons functions the same way as with the remote
scanner located start buttons described above.