User`s guide

Tutorial 3-3
Launching ScanWizard 5-Standard Tutorial
NOTE NOTE Be sure you have the original image (or scan material)
properly placed on the powered on scanner before launching
tutorial.
Launching from an Image Application
You will need to launch SW 5-Standard from an image editing application (e.g.,
Photoshop, PhotoImpact, etc.) if you wish to immediately deliver your output
image to your application for further processing.
Note that for saving your output to a file, or sending it to a printer or an
Internet browser, or as attachment to an e-mail, or saved it to a file before
sending it to your image processor; you need to launch SW 5-Standard as a
stand-alone program from your program manager as explained in the next page.
To launch SW 5-Standard from your image processor, follow the steps below:
Defining Image Source
1. The first time you launch SW 5-Standard from your TWAIN-compliant
application, you need to tell your application program where to source the
image. The defined source is automatically saved in your application, and
you need not repeat the procedure the next time you enter SW 5-Standard
through the same application.
To define the image source after invoking your image editing program
(Adobe Photoshop is used in this example), click on the
File menu. From
the resulting pull-down menu, click on
the Import item and select Select
TWAIN_32 Source... as illustrated below.