User`s guide

Tutorial 3-1
ScanWizard 5-Standard
Control Panel Tutorial
About the Tutorial
This tutorial is embedded in the ScanWizard 5 driver program. To access the
tutorial, you need run to ScanWizard 5-Standard. A powered-up scanner
should also be connected and configured with your host computer (refer to the
Installation Guide) before running the SW 5-Standard. You also need to place a
scan material (original image) on your scanner to obtain a scanned output image
at the end of the tutorial.
The tutorial is intended as a hands-on guide for those with no previous
background on scanning graphic images. In fact beginners can easily produce
an output by running the tutorial and let it do the almost hand-free scanning for
him.
Using Windows
The tutorial assumes that you are familiar with Windows operation. Some
Windows basics are explained below, but if you are unfamiliar with such things
as using a mouse, choosing a command from a menu, opening multiple
windows, entering text, selecting options, choosing actions, or sizing windows,
you should run the Windows tutorial before proceeding. The Windows tutorial
is on the Help menu of the Program Manager window.
Windows Basics
This section highlights some of the basic skills you need in order to work with
the SW 5-Standard window. If you are already familiar with Windows, skip to
the section on Launching SW 5-Standard Tutorial (page 3-3).
3