User`s guide

Microtek Scanner Configuration (MSC) Utility C-1
Appendix C: Microtek Scanner Configuration (MSC) Utility
The Microtek Scanner Configuration (MSC) utility is a companion program of
ScanWizard 5. This utility works only if your scanner model is equipped with
either 3 or 5 buttons.
If your Microtek scanner is equipped with either three or five buttons, you can
use the buttons to complete common scanning tasks.
Things you need to know about the MSC
ScanWizard 5 and MSC are running exclusive of each other. ScanWizard 5 will
not function correctly with the MSC open at the same time.
How ScanWizard 5 works with the scanner buttons
When ScanWizard 5 is launched from the desktop, the Scan, Copy, or E-mail
buttons will complete a prescan and set ScanWizard 5's "Scan To" button to
reflect the scan function you chose.
When ScanWizard 5 is launched from an image-editing application, the Scan,
Copy, or E-mail buttons will only perform a prescan.
Relationship between MSC and the scanner buttons
The MSC utility is available for you to set parameter settings to the respective
scanner button. When MSC is launched, to carry out physical scan, copy, or
e-mail, press the button you need on the scanner.
For detailed information of MSC, see its on-line help.