User`s guide

5-7Reference
Scanner Driver Manager
The Scanner Driver Manager keeps track of the
scanners being used on your system and the
SCSI bus / ID numbers occupied by the scan-
ners. By keeping a record of this information,
the Scanner Driver Manager allows ScanWizard
5 to start up more quickly, as there is no need to
look for devices on the other SCSI buses.
To add a scanner:
Follow the hardware installation instructions for
connecting a scanner to your system. Then you
can use the Scanner Driver Manager in
ScanWizard 5 to add or include the connected
scanner to your scanner list.
1. Go to the Scanner menu in the Preview
window, and choose Scanner Driver Man-
ager. A dialog box will appear showing the
connected scanner and the corresponding
SCSI bus / ID number.
2. Click the Find Scanners button. In case you
have added new scanners, the newly found
scanners will be appended to the scanner list.
If a scanner on the list is not detected (not
turned on, not ready, or removed from the
system), the model will not be removed from
the list but will have a question mark before
it. See below for details on how to remove a
scanner.
3. Click the Close button to close the dialog
box.
To remove a scanner from your scanner list:
1. Go to the Scanner menu in the Preview
window, and choose Scanner Driver Man-
ager.
2. Click the Remove button to delete the
scanner model from your scanner list.
3. Click the Close button to close the dialog
box.
Update Scanner Menu
This command refreshes the SCSI buses and
updates the Scanner menu with the current
scanner list.
This is most useful when ScanWizard 5 is
brought up but one of the scanners is not turned
on or has not become ready.
Only the current scanner list is used, and
ScanWizard 5 will not find or add any new
scanners to the scanner list. This is a short-cut
command without invoking the Scanner Driver
Manager.