User`s guide

Sample Scanning 4-35
Using the Scanner Driver Manager feature
The Scanner Driver Manager keeps track of the scanners being used on your system and the SCSI ID
numbers that they occupy. By keeping a record of this information, it allows ScanWizard 5 to start up
more quickly, as there is no need to look for other scanners.
To add a scanner:
Follow the hardware installation instructions for
connecting a scanner to your system. Then you
can use the Scanner Driver Manager in
ScanWizard 5 to add or include the connected
scanner to your scanner list.
1. Go to the Scanner menu in the Preview
window, and choose Scanner Driver
Manager. A dialog box will appear showing
the connected scanner and the correspond-
ing SCSI ID number.
2. Click the Find Scanners button. In case you
have added new scanners, the new scanners
will be appended to the scanner list. If a
scanner is not detected (not turned on, not
ready, or removed from the system), the
model will not be removed from the list but
will have a question mark before it. See the
next section for details on how to remove a
scanner.
3. Click the Close button to close the dialog
box.
Click here to
update the
connection
status of
scanners in the
scanner list
Click here to find all
connected scanners
To remove a scanner from your scanner list:
1. Disconnect the scanner from your system to
remove it physically.
2. Go to the Scanner menu in the Preview
window, and choose Scanner Driver
Manager.
3. When the dialog box appears, click the
Update List button. The removed scanner
will have a question mark before it.
4. Click the Remove button to delete the
scanner model from your scanner list.
5. Click the Close button to close the dialog
box
Click here to
remove a scanner