User`s guide

Sample Scanning 4-33
Loading and Saving Scan Jobs
This feature lets you save scan jobs, which you can then load when necessary. The idea of saving and
loading scan jobs has important applications, especially for scanners with different templates or
“trays”. Saving / loading scan jobs is also useful if you consistently work in a specific format, scan
the same kind of images, or if the scanner is used by several users who have their own sets of jobs.
If your scanner has several trays, for instance, you may wish to create a scan job for each “tray”—
for example, one for your 4”x5” transparencies and another for your 35mm positives. You can also
create scan jobs to fit the needs of your users, with User A having Scan Job Folder 1 for example, and
User B having Scan Job Folder 2.
Your current
scan jobs
Scan Job
folders
New folder
To use the Load / Save feature:
1. Click on the Load / Save button in the Scan
Job window.
2. When a dialog box appears, go to the folder
of your choice . The sample dialog box
below shows the following:
• The left-hand side of the dialog box
shows your scan job folders. In this
example, a folder called Scan Job
Manager has been created. Inside the
folder are individual folders —35mm
positives and 4x5 transparencies.
• On the right-hand side of the dialog box
are your current scan jobs — Scan Job 1
and Scan Job 2.
Note:
If you click the OK button
and there are no scan jobs
on the right-hand side, a
dialog box will appear. You
will then be asked if you wish
ScanWizard 5 to automati-
cally create a scan job with
default settings for you.