User`s guide

Sample Scanning 4-29
Using the Information Window
The Information window is a floating window used to display color information about the Overview
and Prescan buttons at precise “x” and “y” locations. The Information window can also be used to
change zoom levels for varying magnification rates. Closely related to the Information window is the
function of Information window, which is explained later in this section.
To view the Information window: Go to the View menu in the Preview window, and choose the Show
Info window command (toggle to hide the window).
The Color Input Meter displays the input
(density) pixel values at the specific X/Y
location. Take note of the following:
• For all color image types (RGB), the
density values of the raw image are
displayed.
• For grayscale images, the gray (K) channel
is displayed.
• For single-bit images such as line art, this
section is disabled.
The Color Output Meter displays the output
values of the pixel at the specific X/Y location
Take note of the following:
• The left part of the displayed values is the
“Before” value, or the pixel value before
image correction.
• The right part of the displayed values is
the “After” value, or the pixel value of the
final output image after all image correc-
tions.
The Mouse Cursor Position displays the
position of the mouse cursor on the X and Y
axis of the image.
The Zoom Level Display shows and lets you
select the levels of magnification obtainable —
100%, 200%, 400%, and 800%.
Sample Display area shows a pixelized display
of the specific X/Y location. The size of the
display area depends on the selection made in
the Color Meter Options (discussed next
sectiion).