User`s guide

4-28 Microtek ScanWizard 5 User’s Guide (Macintosh)
Custom Settings
You can also create custom settings in each Advanced Image Correction control, and then add them
to the Settings window menus for quick access to those settings.
To create a custom setting:
1. Choose the desired AIC control in the
Settings window, and select Custom from
the drop-down menu on the right side.
2. When the AIC dialog box for the selected
control comes up, adjust the setting the way
you want it, then click the Add to Menu
button at the bottom of the dialog box.
3. Enter a name for the Custom Setting (ex:
More Red Tint), then click OK.The new
custom setting is added to the menu.
To remove a custom setting:
1. Choose the desired AIC control in the
Settings window, and select Remove Custom
Setting from the drop-down menu on the
right side.
2. When a dialog box appears, highlight the
custom setting to be removed, then click the
Remove button. The custom setting is
deleted from the menu.
Note: To delete the custom setting, you
MUST click the Remove button (not just
select and click OK).
3. Click OK to close the dialog box.