User`s guide

3-8 Microtek ScanWizard 5 User's Guide (Macintosh version)
Scaling scanned image size
By default, ScanWizard 5-Standard scans your
original at full size (100%) . To change the scale
of scanned image, click on the
Scale Output
button. From the submenu, select the predefined
scaling you wish -- from half-size (50%) to twice
the original (200%).
Improving Image Before Final Scan
When you perform a preview of the original
image, ScanWizard 5-Standard automatically
enhances the quality of the image by using its
default settings. For further enhancements,
click on the
Adjust button and set the image
enhancement parameters you need.
After clicking the
Adjust button, adjust the
appearance of the preview image by dragging
the pellet button along the slider. As you drag
the pellet button, your preview image is
updated in real time. To reset the correction
tool back to its original settings, click on the
reset icon at right end of each tool (see figure at
right).
Note that the new settings are automatically saved
and remain effective for subsequent prescanning
or scanning the next time you start your Macintosh. The
settings are still effective, unless otherwise redefined
or reset to the default values.
Reset icon. Use this icon
to individually reset the
adjustment you have made
to each image correction
tool, back to its default
setting.