User`s guide

Your First Scan 3-1
Your First Scan with
ScanWizard 5-Standard
Launching/Exiting ScanWizard 5
Be sure to launch from your image processor if you wish to further edit or
manipulate the scanned image with your application. Launch from your scanner
start buttons, ScanWizard 5 Assistant button, or Macintosh ScanWizard 5 folder
if you are going to save, print, browse, or e-mail the output image.
To quit ScanWizard 5, simply click on the close button at upper left corner of
the ScanWizard 5-Standard window.
When Launching from Scanner Start Buttons and
Assistant Buttons
If your scanner is equipped with the “Go”, or the combination of “Scan”,
“
Copy”, and “E-mail” start buttons, you may launch ScanWizard 5-Standard by
pressing any of the buttons (or clicking from the desktop Assistant buttons).
ScanWizard 5-Standard will run as a stand-alone program, but varying default
output image destinations will result in each type of button:
“
Go”/“Scan” start button runs ScanWizard 5-Standard as if it were launched
from Start menu. The last function defined for the scan button will
be the default for the next scanning session. You may change output
image destinations as you please.
“
Copy” start button runs ScanWizard 5-Standard with the primary
purpose of printing your output image. Hence, you are prompted
with a printer setup dialog box before final scanning. You may,
however, abort printing and redirect output image to other
destinations as in regular operation.
“
E-mail” start button runs ScanWizard 5-Standard with the intent of
attaching the output image to your e-mail composer. Hence, you
are prompted with a dialog box where “
E-mail” or “Internet Mail”
are the only possible destinations for the output image after it is
saved to file. You may, however, abort the e-mail processing and
redirect output image to other destinations.
3