User`s guide

B-9Kodak Color Matching System
JAPANESE PRINTING STANDARDS:
Filename Profile Description GCR Maximum TAC
jpcmyk02.pf Light GCR 260 UCR CMYK Light 260%
Japan Std. Proofing
jpcmyk04.pf Light GCR 280 UCR CMYK Light 280%
Japan Std. Proofing
jpcmyk06.pf Light GCR 300 UCR CMYK Light 300%
Japan Std. Proofing
jpcmyk08.pf Light GCR 320 UCR CMYK Light 320%
Japan Std. Proofing
jpcmyk10.pf Light GCR 340 UCR CMYK Light 340%
Japan Std. Proofing
jpcmyk50.pf Light GCR 360 UCR CMYK Light 360%
Japan Std. Proofing
You read these settings as follows:
• All TAC percentages have the maximum degree of UCR in order to attain the highest density
blacks within that TAC limit.
• A Light GCR means a small percentage of the possible gray component is replaced with black.
Check With Your Service Provider
These DCPs were created with the following conditions in mind. You will want to check with your
service provider to confirm the laydown order.
Colorant Laydown Order: Yellow, Magenta, Cyan, Black
This DCP assumes that your imagesetter has been linearized. So, it’s important that you use some
kind of calibration software for your imagesetter.