Specifications

12 ScanMaker s460 Supplement
B. Scanning 35mm Slides
1. Turn the LightLid 35 Plus II over. Load the slide inside the lower slot of the
LightLid, with the slide facing up.
The slides should be inserted inside the slots specifically allotted for slides, as
shown in the illustration.
2. Place the LightLid 35 Plus II vertically on the glass surface of the scanner, and
center it along the ruler of the scanner.
3. Follow the procedures (steps 3 through 10) for scanning 35mm filmstrips to carry
out scanning.
In step 4, instead, choose Positive Film.
The lower slot is for
loading 35mm slides
Ensure that the calibration
window is kept clear and
free from any obstruction for
successful calibration and
best image results.