Operating instructions

MINILINK® 5.8 RECEIVER DESCRIIPTION
A. FRONT VIEW
1. LED INDICATOR
Indicates power is on when illuminated
B. REAR VIEW
1. POWER INPUT
12VDC 440 mA. Power supply included.
2. RF INPUT
“F” connector, connection to LNB via RG6 coaxial cable.
3. AUDIO OUTPUT
Mono audio output to video monitor or VCR, use either right or left
channel
4. VIDEO OUT
Supply filtered, clamped video output to video monitor or VCR.
5. VIDEO OUT
Supply filtered, clamped video output to video monitor or VCR.
- 3 -
C. BOTTOM VIEW
1. CHANNEL SELECT DIPSWITCH
Dip switch for selection channels 1 – 10. (Receiver and transmitter
channels must match)
2. CHANNEL SELECT LABEL
Shows dip switch settings for channels 1 – 10.
D. WIRING DIAGRAM
- 4 -
1 2 3 4 5
1
DVR/Monitor Audio In
DVR/Monitor Video In
Extra Video Ou
t
12VDC
Power
Supply
LNB
IMPORTANT: Use only RG 6 coaxial cable
with the supplied waterproof “F” connectors to
connect Receiver and LNB. Cable length should
be a minimum of 10 feet and a maximum of 100
feet. Longer cable runs require line amplifier,
contact MicroTek for information.
1
2