User Guide

Caution: Any invisible greasy residue or perspiration on the hands will shorten the
life of the bulb. Therefore, do not replace the lamp with your bare hands. Please
put clean gloves on your hands or handle the bulb with a clean cloth during the
replacement.
1. Turn the power of the projector off and unplug the power cord.
2. Loosen the screws on the lamp cover with a coin or screwdriver, and take off
the lamp cover.
3. Loosen the screws on the lamp case with a coin or screwdriver.
ＶＸ２．ｐ６５ 02-10-18, 11:0542