User Guide

$$
Appendix F  Warning and Error Messages
The table below lists warnings and error messages associated with operating the camera. Follow the recommended
solutions to resolve errors.
Warning and Error Messages Problem Solution
(Blinking) Batteries are exhausted Turn the camera off; replace or recharge batteries
BATTERY LOW!!! Battery power is depleted; Replace or recharge batteries
camera will shut down soon.
CARD ERROR! The SD card contact area Use cotton swab dipped with industrial alcohol to clean
is smudged or soiled the contacts
The SD card is damaged Replace the SD card
Incorrectly formatted SD card Reformat or replace the SD card
Camera is faulty Contact Microtek Customer Service
MEMORY FULL! The memory space is fully recorded Erase some data or use an SD card that has ample free space