User Guide

#'
The camera does not shoot images,
movies, or record audio clips.
The subject is not in the LCD
screen.
A1: The Mode switch is set to the incorrect mode.
 Set the Mode switch to Photo mode ( ) to capture still images.
 Set the Mode switch to Movie/Audio mode (
/ ) to record movie/
audio clips.
A2: The flash has not finished charging.
 Wait until the flash is fully charged. When the Flash charger LED
stops blinking and steadily illuminates in green, the flash is fully
charged.
A3: There is no available memory left on the SD card.
 Download files to your computer and removes the existing files from
the SD card, then you will have more available memory space.
 Replace with a new SD card.
A4: The SD card is write-protected.
 Set the write-protected tab on the SD card to the unlocked position.
A5: The SD card is corrupted or not formatted correctly.
 Reformat the SD card.
 The SD card may be damaged; contact your dealer.
A1: The Mode switch is set to the incorrect mode.
 Set the Mode switch to Photo mode (
) or Movie/Audio mode ( /
).
A2: The LCD screen is manually switched off.
 Press the DISP button to turn it on.
A: Digital Zoom is disabled when shooting movies.
A: The Date Stamp setting is disabled.
 Enter the Setup mode and enable the Date Stamp function.
A: The date and time are incorrectly set.
 Enter the Setup mode, then set the correct date and time.
Digital Zoom does not function.
The date stamp could not be found
on the printed image.
The time/date stamp on the images
or movie/audio clips is incorrect.