User Guide
50
Getting the Camera Ready
1. Make sure the SD card
containing the images you
wish to download is inserted
in the camera.
Connecting the Camera
1. Make sure your computer is turned on.
2. Connect the camera to your computer, using the
provided USB cable.
Connect the narrow end of
the USB cable to the
cameras USB connector.
Connect the flat end of the
USB cable to the USB
connector of your
computer.
In a few moments, your
computer will automatically
detect the camera.
A USB Mode screen
appears, indicating that USB
connection is complete.
2. Make sure that the USB Switch is switched to USB
Mode.
If the USB Switch is set to the incorrect mode, you will
need to do the following:
a. Press the MENU button to
enter the Setup mode ( ).
b. Select USB Switch,
then select USB Mode.
c. Press the MENU twice to exit
the mode menu.
NOTE:
With an SD card installed in your camera, the system
reads the contents from the SD card alone.
Without an SD card installed in your camera, the system
reads contents from the camera's internal memory.
The SD card may be placed into any card reader device.
The still images, movies, and audio stored on the card
can then be read from the card reader and copied to the
computer.