User Guide

49
Dowloading to Your Computer
The camera is equipped with an USB connector that
allows you to view images recorded by the camera on
a computer instead of on the LCD screen.
NOTE: If you use Windows 98/98SE, please follow
the steps below to install the camera driver first:
1. Turn on your PC and insert
the supplied Microtek CD-
ROM in the CD-ROM drive.
The Microtek Software
Installer screen appears
automatically.
2. Click Camera Driver when it appears on the
screen, then follow the on-screen instructions to
install.
3. Click EXIT on the Microtek Software Installer
screen when the camera driver has been installed.
4. Restart your computer.
System Requirements
 CD-ROM drive (for installing software)
 A display with 24-bit color output capability
 128MB RAM or more recommended
PC  Windows 98/98SE/2000/Me/XP
 Pentium PC or higher with USB port
Mac  Mac OS 9.x; Mac OS X 10.1.3 or later
 Apple Macintosh series with built-in USB port
To view the recorded images on your computer, follow
the steps below:
1. Get the camera ready.
2. Connect the camera to the computer.
3. Copy the camera's images to the computer.
4. View the camera's images on the computer.