User Guide

"
Slide Show
The Slide Show function enables you to view your
stored images by playing them back in sequence (if you
have stored more than one image).
To run a slide show:
1. Set the Mode switch to Playback mode (
).
2. Press the MENU button.
3. Use the 4-way arrow button
to select 
  Slide Show.
When selected, the OK?
setting appears as well and is
highlighted in red, allowing you
to run a slide show.
4. Press the Shutter (OK) button.
The slide show starts.
5. Press the Shutter (OK) button again to stop the slide
show.
Rotating Images
If you take a picture while holding the camera
vertically, this selection enables you to rotate the image
to a horizontal position when you play it back later for
viewing.
To rotate the image:
1. Set the Mode switch to Playback mode (
).
2. Press the MENU button.
3. Use the 4-way arrow button
to select 
  Rotation.
When selected, the OK?
setting appears as well and is
highlighted in red, allowing you
to rotate an image.
4. Press the Shutter (OK) button.
A screen appears to allow you
to rotate the image or to
cancel.
5. Use the 4-way arrow button
to select 90°, 180°, or
270°, then press the
Shutter (OK) button.
The picture is rotated.