User Guide

AUDIO-VOLUME: Use this option to increase or
decrease the volume of the LCD monitor’s sound
system.
INFORMATION: Use this option to view information
on the display mode and firmware version. This is a
display-only setting and cannot be adjusted further.
EXIT: Use this option to exit the Misc Control
submenu.
OSD Exit Option
Use the OSD Exit item to close the OSD program.
The OSD Exit option lets you close the OSD
Program. Take note that the OSD will close by itself
if left inactive.
1.NO VIDEO
When the monitor is ON and no Video signal is
being received, the “NO VIDEO” message will
be displayed.
2.Signal out of monitor’s supported range
When the frequency range is out of the
monitor’s specifications, or the incoming resolu
tion is higher than 1280x1024, the video data
will be turned off and a warning message
“OVER RANGE” will be displayed.
Note:
Ｃ９９７ＳＤ Ｅｎｇｌｉｓｈ．ｐ６５ 03-3-26, 13:4019