User Guide

16
Note:
1. No Video
When the monitor is ON
and there is no Video
signal received, the
following message will be
displayed.
2. Signal out of monitor’s supported range (Please refer to
Addendum)
When the frequency range is out of the monitor’s specifications, the
display will show the following message on two cases:
Case 1:
The incoming frame rate is
higher than 75Hz.
In this case, the screen display
may not be centered and a
warning message appears.
OSD Exit Option
Use the OSD Exit item to close the OSD program.
Press the Function Enter button, with the OSD Exit item
selected, to exit the OSD program.
The OSD will close by itself if left inactive.
Case 2:
The incoming resolution is
higher than 1280 x 1024.
In this case, the video data will
be turned off and a warning
message appears at center.