User Guide

8
Connecting the Stereo Speakers
Please refer to the following instructions for connecting the LCD
Monitor’s stereo speakers.
1. Connect the 1.5M mini stereo audio cable to the Line out of your PC’s
audio card.
2. Connect the other end of the 1.5M sound cable to the LCD Monitor’s
line-in jack. Please refer to Figure 1-7.
Figure 1-7: Connecting the Stereo Speakers
3. You can adjust the sound volume of the stereo speakers by using the
speaker volume control function on the OSD (On-Screen Display).
Please refer to the next chapter for details.
Power Management System
The LCD Monitor complies with the VESA DPMS (version 1.0p) power
management proposal. The VESA DPMS proposal provides four phases
of power saving modes by detecting the horizontal or vertical sync signal.
When the LCD Monitor is in power saving mode or detects an incorrect
timing, the Monitor screen will go blank and the power LED indicator will
start to blink.