User Guide

6
Connecting AC Power
Please refer to the following instructions for connecting AC power to the
LCD Monitor.
1. Plug the female end of the power cable into the AC-adapter. Plug the
male end of the power cord into a wall socket. The plug on the power
cable will vary according to the electrical standard in your area.
Please refer to Figure 1-4.
Figure 1-4: The AC Adapter
2. Connect the power connector of the adapter into the jack of the LCD
Monitor. The DC power jack is located at the rear of the Monitor near
the USB Hub connector. Please refer to Figure 1-5.
Figure 1-5: Connecting Power to the LCD Monitor