C997SD 19” LCD MONITOR USER’S MANUAL i
ii
FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
CE mark for Class B ITE (Following European standard EN55022/1998; EN61000-3-2/1995; EN61000-3-3/1995, EN55024/1998, EN60950/ 1992+A1+A2+A3+A4+A11) Radio Frequency Interference Statement Warning: This is a Class B product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.
Table of Contents The LCD Monitor ...................................................................................... 1 Your New LCD Monitor! ................................................................... 1 Unpacking .......................................................................................... 1 Identifying Components ................................................................... 2 The LCD Monitor — Front View ................................................
The LCD Monitor Your New LCD Monitor! Your LCD Monitor has been designed to be versatile, ergonomic and user-friendly. The LCD Monitor is capable of displaying most standards, from 640 x 400 VGA to 1280 x 1024 SXGA. The digital controls located on the front panel allow the user to easily adjust the Monitor’s display parameters. The LCD Monitor’s small footprint allows you more room in your workspace for other peripherals. Lightweight and compact, the LCD Monitor is the perfect solution for users on the go.
Note: Using a computer for an extended period of time with a poor workstation set-up and incorrect working habits can cause health problems. The science of ergonomics studies the relationship between health and a suitable working environment. There is a section on ergonomics at the end of this chapter. For more information on ergonomics, contact your nearest computer bookstore, or local library. The Internet also has information on this and other subjects.
The LCD Monitor — Front View Figure 1-1: The LCD Monitor Panel and Controls 1. LCD Screen The LCD Monitor Screen is a 19” TFT 1280 x 1024 SXGA screen. 2. Function Control Buttons /OSD Menu Button The 1st button allows you to pop up the OSD (On-Screen Display) Menu and to select the function group. The 2nd button allows you to select one of the control functions within each function group. 3.
The LCD Monitor — Rear View Figure 1-2: LCD Monitor’s Rear Ports 1. DC Power Jack for AC adaptor Connect the AC adapter cable to this jack. 2. Audio Line-in Connect your PC’s line-out to this jack to listen the PC’s audio on the LCD monitor’s stereo speakers. (You can also connect your CDROM’s line-out to this jack.) 3. VGA Cable Connector This 15-pin D-Sub VGA connector is used to connect to your PC’s VGA card. 4.
Adjusting the Viewing Angle Your LCD Monitor is designed to allow you to adjust it to a comfortable viewing angle. The LCD Monitor’s vertical angle setting range is from -5° to 20°. Please see Figure 1-3. Figure 1-3: Angle Settings • When positioning the equipment, make sure that the main ports and sockets are easily accessible. • Do not place your LCD Monitor close to a heat source. • Do not place the LCD Monitor in direct sunlight or near a window.
Connecting AC Power Please refer to the following instructions for connecting AC power to the LCD Monitor. 1. Plug the female end of the power cable into the AC-adapter. Plug the male end of the power cord into a wall socket. The plug on the power cable will vary according to the electrical standard in your area. Please refer to Figure 1-4. Figure 1-4: The AC Adapter 2. Connect the power connector of the adapter into the jack of the LCD Monitor.
Connecting Video 1. Turn off your PC and the LCD Monitor before connecting your LCD Monitor to the computer. 2. Connect one end of the VGA signal cable to the PC’s D-sub VGA port and the other end to the monitor VGA port. Please refer to Figure 1-6 3. If your PC has a graphic card with a 24-pin DVI connector, you should connect it with the Digital 24-pin DVI signal cable. Figure 1-6: Connecting the LCD Monitor to the PC 4.
Connecting the Stereo Speakers Please refer to the following instructions for connecting the LCD Monitor’s stereo speakers. 1. Connect the 1.5M mini stereo audio cable to the Line out of your PC’s audio card. 2. Connect the other end of the 1.5M sound cable to the LCD Monitor’s line-in jack. Please refer to Figure 1-7. Figure 1-7: Connecting the Stereo Speakers 3. You can adjust the sound volume of the stereo speakers by using the speaker volume control function on the OSD (On-Screen Display).
The Display Controls The LCD Monitor’s Display Controls This chapter covers the LCD Monitor’s On Screen Display (OSD). Using the OSD, you can adjust the contrast, brightness, display position, display clarity, and color temperature. You can also adjust the stereo speaker volume and set OSD parameters. Please read this chapter carefully to get the most out of your LCD Monitor. Adjusting the Monitor’s Display The LCD Monitor features an intuitive, menu-driven, On-Screen Display (OSD).
Main menu Submenu Description Figure 2-1: The OSD Main Menu The Auto Adjust Option Choosing the Auto Adjust option lets the monitor determine and select the settings that are most appropriate for your system requirements. With the Auto Adjust icon selected, press the Function Enter button to apply the automatic monitor settings. The Monitor-Control Option The Monitor-Control option allows you to adjust the LCD monitor’s display characteristics.
Port-Select: Press the Adjust buttons to change input between VGA port and DVI digital port (optional). Exit: Pressing the Function Enter button exits the MonitorControl submenu. OSD-Control Option The OSD-Control menu option lets you adjust the position of the OSD on the screen. With the OSD-Control icon selected (use the Function select buttons), press the Function Enter button to display the submenu.
Information: The Information submenu option is a display only item that provides information on the display mode and firmware version. Exit: Pressing the Function Enter button exits the MiscControl submenu. Graphic-Control Option The Graphic-Control option lets you make adjustments that effect the contrast, brightness and color of the LCD monitor’s display. With the Graphic-Control icon selected, press the Function Enter button to display the submenu.
Graph/Text Option The Graphic/Text option lets you switch between text and graphic display modes. Press the Function Enter button to switch between the text and graphic options. OSD Exit Option Use the OSD Exit item to close the OSD program. Press the Function Enter button, with the OSD Exit item selected, to exit the OSD program. The OSD will close by itself if left inactive.
The Monitor-Control Option The Monitor-Control option allows you to adjust the LCD monitor’s display characteristics. With the Monitor-Control icon selected, press the Function Enter button to display the submenu. Use the Function Enter buttons to select one of the following submenu options: Port-Select: Press the Adjust buttons to change input between VGA port and DVI digital port (optional). Exit: Pressing the Function Enter button exits the MonitorControl submenu.
Misc-Control Option The Misc-Control menu option lets you select the OSD display language, adjust the volume setting and view system information. With the Misc-Control icon selected, press the Function Enter button to display the submenu. Use the Function Select buttons to select one of the following submenu options: Language: Use the Adjustment Control buttons to scroll to the desired OSD display language. The supported languages are German, English, French, Spanish, and Italian.
OSD Exit Option Use the OSD Exit item to close the OSD program. Press the Function Enter button, with the OSD Exit item selected, to exit the OSD program. The OSD will close by itself if left inactive. Note: 1. No Video When the monitor is ON and there is no Video signal received, the following message will be displayed. 2.
Appendix Troubleshooting Procedures This LCD Monitor was pre-adjusted in the factory with standard VGA timing. Due to output timing differences among various VGA cards, you may initially experience an unstable or unclear display when a new display mode or new VGA card is selected. This LCD Monitor Supports Multiple VGA Modes. Refer to Addendum for a listing of the factory-preset modes supported by this LCD Monitor.
PROBLEM: There is no LCD Display If there is no display on the LCD, please perform the following steps: 1. Make sure that the power indicator on the LCD Monitor is lit, all connections are secure, and the system is running on the correct timing. Refer to the Addendum for information on timing. 2. Turn off the LCD Monitor and then turn it back on again. Press the upper Function Control button (refer to Chapter 2) once and then press either the upper or lower Adjustment Control button several times.
Addendum Technical Information LCD Monitor Specifications C997SD C997SD LCD Panel 19” SXGA 24-80k 50-75 Submenu Scanning Frequency H/V, Hz (Digital mode) 30-80k 50-75 Monitor Control Horizontal Position/Vertical Position/Phase/Clock/Reset/Port select/Exit Power Management Meets VESA DPMS OSD Control OSD Horizontal Position/OSD Vertical Position/Exit Power Consumption (ON/OFF, W) 50W (max.)/5W (max.) (Measured from AC inlet) Misc.
Addendum Technical Information LCD Monitor Specifications C997SD C997SD LCD Panel 19” SXGA 24-80k 50-75 Submenu Scanning Frequency H/V, Hz (Digital mode) 30-80k 50-75 Monitor Control Horizontal Position/Vertical Position/Phase/Clock/Reset/Port select/Exit Power Management Meets VESA DPMS OSD Control OSD Horizontal Position/OSD Vertical Position/Exit Power Consumption (ON/OFF, W) 50W (max.)/5W (max.) (Measured from AC inlet) Misc.
Supported Timing Dot Clock (MHz) Vertical Scanning Frequency (Hz) Horizontal Scanning Frequency (kHz) Sync Polarity or composite sync (H/V) Operating Mode 640x400 25.20 70.15 31.50 -/- A/D/G 640x400 21.05 56.42 24.83 -/- A/G 640x480 30.24 66.67 35.00 -/- A/D/G 832x624 57.28 74.55 49.73 -/- A/D/G 1024x768 80.00 75.02 60.
Supported Timing Dot Clock (MHz) Vertical Scanning Frequency (Hz) Horizontal Scanning Frequency (kHz) Sync Polarity or composite sync (H/V) Operating Mode 640x400 25.20 70.15 31.50 -/- A/D/G 640x400 21.05 56.42 24.83 -/- A/G 640x480 30.24 66.67 35.00 -/- A/D/G 832x624 57.28 74.55 49.73 -/- A/D/G 1024x768 80.00 75.02 60.
