Operation Instructions Thank you for purchasing this high-resolution multiscan color monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installation.
Contents Safety Precautions.........................................................1 Care and Maintenance ..................................................2 First Step ......................................................................3 Front Panel Control ......................................................4 Using OSD Functions ..................................................5 Supporting Timing modes ...........................................9 Technical Information ...............................
Safety Precautions This monitor is manufactured and tested on the ground principle that a user’s safety comes first. However, improper use or installation may not only damage the monitor but endanger the user as well. As a safety precaution, go over the following WARNINGS carefully before installation, and keep this guide handy. WARNINGS: l This monitor should be operated only at the correct power sources indicated on the label at the rear end of the monitor.
Care and Maintenance Care l Avoid exposing your monitor directly to sunlight or other heat sources. Place your monitor away from the sun to reduce glare. l Put your monitor in a well ventilated area. Do not place anything heavy on top of your monitor. l Make certain that your monitor is installed in a clean and moisture-free area. l Keep your monitor away from magnets, motors, transformers, speakers, and TV sets.
First Step Congratulation for purchasing this high-performance monitor! Please check all accessories listed in the packing list. Quick Installation 4. Windows users: Setting the Timing Mode (Resolution and Refresh Rate) Example: 1280 x 1024 @ 60 Hz Resolution: Right-click on the Windows desktop > Properties >Settings > “Desktop Area”. Set the resolution. Refresh Rate (vertical frequency): See your graphic card’s user guide for instructions. 1.
Front Panel Control ACTIVATE/EXIT OSD SELECT DESIRED FUNCTION SCROLL DOWN/DECREASE LED INDICATER SCROLL UP/INCREASE POWER ON/OFF 9 10 AC INPUT VGA INPUT AUDIO INPUT EARPHONE 4
Using OSD Functions 1. Press the button 2. Press the or▼button to scroll to the desired menu option. 3. Press the button 4. Press the to display the main menu shown below. to select the menu option. or▼ button to select submenu option. 5. After making adjustment, press button to save changes and exit the screen.
Image Adjust Auto Tune H./V. Position H. Size Phase 1 Exit 2 Select Auto Tune : automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion. Press the button to obtain a sharper image. NOTE: Auto tune works with most common video cards. If using this function does not work on your monitor, lower the video refresh rate to 60 Hz and try again (See computer or graphic card user guide to adjust refresh rate.
Color Temp R G B Color Temperature Select User Color 1 Exit 2 Select Color Temperature : provides four preset color adjustments:9300K, 6500K, 5400K, 5000K for improved brightness and color saturation. Press button to select the preset color. 9300K--Adds blue to screen image for cooler white. 6500K--Adds to screen image for warmer white and richer red. 5400K--Adds green to screen image for a darker color. 5000K--Adds blue and green to screen image for a darker color.
Setup Menu OSD Language Select OSD Position OSD Temeout 1 Exit 2 Select Language Select : allows the user to choose from available languages. OSD Position : Press the button to select the horizontal or vertical OSD position. Horizontal OSD Position horizontally repositions all OSD screens. moves OSD right, ▼moves OSD left. Vertical OSD Position vertically repositions all OSD screen. moves OSD up, ▼ moves OSD down.
Supporting Timing modes VESA 640 x 480 @ 60HZ VESA 640 x 480 @ 72HZ VESA 640 x 480 @75HZ VESA 800 x 600 @ 56HZ VESA 800 x 600 @ 60HZ VESA 800 x 600 @ 72HZ VESA 800 x 600 @ 75HZ VESA 1024 x 768 @ 60HZ MAC 1024 x 768 @ 70HZ VESA 1024 x 768 @ 75 Hz VESA 1280 x 1024 @ 60HZ VESA 1280 x 1024 @ 75HZ Warning : Do not set the graphic card in your computer to exceed these maximum refresh rates. Doing so may result in permanent damage to your monitor.
Technical Information LCD Type 17.0” TFT Color filter SXGA Active Matrix,0.264mm pixel pitch Glass surf. RGB, vertical stripe Antic-static & hard coating Input Signal Analog RGB Analog (0.7 – 1.0Vpp, 75 ohms) Separate H/V (TTL) , Fh:30 – 80kHz, Fv:50 – 75Hz Compatibility 1280x1024@ 60Hz (recommended) Power 100-240 VAC 50/60 Hz, 50Watts (Maximum) Audio 350 – 20 KHz (option) LCD Display Color 16.
