CONTENT FCC Compliance Statement .................................................................... ii Safety Precautions .................................................................................. iii Care and Maintenance ........................................................................... iv Introduction .............................................................................................. 1 Product Package ...........................................................................
Operation Instructions Thank you for purchasing this monitor, a high-resolution multi-scan color monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING:(FOR FCC CERTIFIED MODELS) This monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installation.
Safety Precautions This monitor is manufactured and tested on the ground principle that a user’s safety comes first. However, improper use or installation may not only damage the monitor but also endanger the user. As a safety precaution, go over the following WARNINGS carefully before installation, and keep this guide handy. WARNINGS: • This monitor should be operated only at the correct power sources indicated on the label at the rear end of the monitor.
Care and Maintenance Care • Avoid exposing your monitor directly to sunlight or other heat sources. Place your monitor away from the sun to reduce glare. • Put your monitor in a well-ventilated area. Do not place anything heavy on top of your monitor. • Make certain that your monitor is installed in a clean and moisture-free area. • Keep your monitor away from magnets, motors, transformers, speakers, and TV sets.
INTRODUCTION BEFORE INSTALLING YOUR MONITOR READ THIS MANUAL COVER TO COVER. PAY ATTENTION to WARNING and CAUTION signs. DO NOT use computer components not recommend by the manufacturer. Do not attempt to service the monitor yourself. If a problem occurs, contact your dealer or authorized service center. ABOUTYOUR MONITOR This monitor is a microprocessor-controlled color monitor which uses a TFT LCD panel.
PRODUCT PACKAGE Open the shipping carton and check the contents. If any items are missing or damaged, contact your dealer immediately. The package should include the following items: • Analog Color TFT LCD Monitor • Accessory Box: 1. VGA cable x1 2. AC-DC adapter x1 3. Audio cable 4. Power Cord x 1 5.
INSTALLING THE MONITOR The monitor is equipped with an auto-sensing power supply for voltage ranging from 110~240VAC, 60/50Hz. Confirm the line voltage designation on the rear panel of the monitor. Follow these steps to install the monitor: 1. Before you connect the cables, make sure that the monitor and the system unit power switches are OFF. 2. Plug one end of the 15pin signal cable to the monitor and the other end to the video signal connector at the rear of the system.
CONTROL FUNCTIONS The Monitor control functions are located on the lower center of the front panel. Details follow below. Description of control keys: 1. : 2. -/+: 3. / Power Switch Decrease/Increase or Volume control : Cursor Up/Down or Brightness control 4. MENU: Activates on-screen display functions 5.
1. : Power switch Use the power switch to turn power ON or OFF. We recommend turning your system power on first, followed by the LCD monitor. 2. - & + : Decrease & Increase/Volume Control keys These keys have two functions, controlled by the MENU key. When the OSD screen is activated, these two keys are uses to decrease or increase the values of the selected items. When the OSD screen is NOT activated, these two keys are used to turn up or turn down volume. 3.
ADJUSTINGTHE MONITOR The LCD monitor is designed to work with a range of compatible video adapters on the market. Due to possible deviations between these video adapters, you may need to make some adjustments on the adapter to make sure it fits your monitor. ADJUSTMENT PROCEDURE 1. Activate the OSD screen by pressing the MENU key. The screen below will appear. OSD SCREEN 1280X1024 75 Hz/80 KHz AUTO ADJUSTMENT LANGUAGE DOS TXT/GFX OFF USER 50 OFF 100 VERSION & SXGAAF181-6123 2.
AUTO-ADJUSTMENT Note: We strongly recommend that you use this item to get optimum visual quality. Use the & key to select auto-adjustment, then press - or + to get the optimized quality. RGB ADJUSTMENT Use the & will appear. key to select the icon, then press - or +.
GEOMETRY ADJUSTMENT Use the & will appear. key to select the icon, then press - or +. The screen below 1280X1024 75 Hz/80 KHz 223 24 1056 25 PHASE VERSION SXGAAF181-6123 If you want to go back to the previous OSD menu screen, press the MENU key, The OSD screen will then appear. Vertical & Horizontal Position adjustment 1. Use the & key to move to the ICON, then press - & + to move the whole screen left to right to the center position. 2.
Multi-language Five OSD languages are supported for customer selection. 1280X1024 75 Hz/80 KHz English German French Italian Spanish VERSION SXGAAF181-6123 DOS Txt/GFX Display mode of 640 x 400 (graphic mode) or 720 x 400 (text mode) is supported. ColorTemperature Three modes are provided: user mode, 6500, and 9300. User the & key to move to the color temperature item, then press - & + to select the color temperature setting. If the 6500 or 9300 values are set, the value cannot be changed.
FACTORY-PRESET MODES Table 1 shows standard video mode settings that have been pre-adjusted at the factory for accurate video display. These setting are stored in the monitors memory. Table 1. Factory-Preset Modes Mode Resolution H-Freq.(KHz) V-Freq (Hz) NEC 640 x 400 24.83 56.4 VGA 640 x 350 31.47 70 720 x 400 31.47 70 640 x 480 31.47 60 640 x 480 37.86 72 640 x 480 37.5 75 800 x 600 35.16 56.3 800 x 600 37.88 60.3 800 x 600 48.08 72.2 800 x 600 46.87 75 1024 x 768 48.
SPECIFICATIONS 17" LCD Monitor Overall Dimensions (H x W x D): 426 x 444 x 215 mm Shipping Weight (G/W): 10 Kg Effective display area (H/V) 337.92 x 270.34 mm Display colors: 16.7 million colors Brightness: 200 cd/m2 (min) Contrast Ratio: 300:1 Scan Frequencies: Horizontal Vertical 31.47 KHz to 80 KHz 60 Hz to 75 Hz Number of Pixels: 1280 x 1024 pixels Pixel pitch: 0.264 x 0.
OPERATIONS User Controls On/Off Power Button Select and adjust button Auto-adjustment On Screen Display Contract, Brightness Adjustment H-position, V-position Color temperature Multi-language Auto Adjustment Volume, Mute Control Type: Digital Compatibility: IBM and compatibles, Apple Macintosh, NEC Environmental Limits: Operating Temp. Storage Temp.
SIGNAL CONNECTOR PIN ASSIGNMENT Power Connector Pin 1 Ground Pin 2 +12V output RGB Signal connector Pin 1 Analog Red Input Pin 2 Analog Green Input Pin 3 Analog Blue Input Pin 4 Ground Pin 5 Digital Ground Pin 6 Analog Red Input Pin 7 Analog Green Input Pin 8 Analog Blue Input Pin 9 NC Pin 10 Sync Ground Pin 11 Ground Pin 12 SDA (DDC Data) Pin 13 H.Sync Pin 14 V.
