User Guide

Manual adjustment

a) Power ON the LCD monitor and computer.

b) Adjust according to the above-mentioned “Operating Procedure” and “Menu

Table” to adjust the screen to a favorable screen display.

OSD Adjustment Lock

This function is used to prevent changing the adjusted status by mistake. All the

adjustable items except “BRIGHTNESS” will be locked.

a)Press the “„” and “-“ buttons at the same time and the “CONTROL LOCK”

screen is displayed.

b) Press “+” button, and the “CONTROL LOCK’ status displays while the OSD

screen disappears. If OSD screen displays again, the “LOCKED” will be displayed

in the upper-right corner of the screen.

c) To release the “CONTROL LOCK’ status, press the “„” and “-“ buttons at the

same time and display the “CONTROL LOCK” screen. Then, press the “-” button

to release the “CONTROL LOCK’ status. It will become “CONTROL LOCK’ status

while the OSD screen disappears. If the OSD screen displays again, the “LOCKED”

in the upper-right corner of screen will disappear.

„