User Guide

Energy Declaration

This monitor is equipped with a function for saving of energy which supports the VESA Display

Power Management Signaling ( DPMS ) standard. This means that the monitor must be connected

to which supports VESA DPMS to fulfill the requirement in the NUTEK specification. Time settings

are adjusted from the system unit by software. From indicated inactivity to Power Saving Position

A2 the total time must not be set to more than 70 minutes.

NUTEK VESA State LED Indicator Power Consumption

Normal operation ON Green 35 W ( Max )

Power Saving Position A1 SUSPEND Orange-Flash 5 W ( Max )

Power Saving Position A2 OFF Orange-Flash 5 W ( Max )

We recommend you to switch off the monitor when it is not in use for quite a long time

Cleaning the LCD Screen

1. Make Sure the LCD monitor is turned off and never spray or pour any liquid directly onto the

screen or case.

2. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.

3. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto

a clean, soft, lint-free cloth, and wipe the screen.