User Guide

26
5) Using the 4" x 5" batch film holder
1. Insert the films to be scanned into the 4" x 5"
batch film holder.
a) Push to open the holder.
b) Place the films in the holder.
c) Pull to close the holder.
For high-resolution scanning: Insert the films into
the holder in the area that labeled “HIGH
RESOLUTION” on the holder.
2. Pull the transparency tray out a little, then
place the 4" x 5" batch film holder into the
transparency tray.
Note: Push the holder back to place, make sure it is
firmly seated in the transparency tray.
3. Gently push the transparency tray back in.
e_2815body.p65 11/9/00, 4:53 PM26