User Guide

For high-resolution scanning: Insert the 35mm

filmstrip into the holder in the area that labeled

“HIGH RESOLUTION” on the holder.

2. Pull the transparency tray out a little, then

place the 35mm filmstrip holder into the

transparency tray.

Note: Push the holder back to place, make sure it is

firmly seated in the transparency tray.

3. Gently push the transparency tray back in.

3) Using the 35mm filmstrip holder

1. Insert the 35mm filmstrip to be scanned into

the 35mm filmstrip holder.

a) Push to open the 5-piece 35mm filmstrip

holder.

b) Place the 35mm filmstrip in the holder.

c) Pull to close the 5-piece 35mm filmstrip

holder.

e_2815body.p65 11/9/00, 4:53 PM24