User Guide

22
1) Using the glass film holder
1. To scan non-standard-sized transparent film,
place the film faced down on top of the glass
surface of the glass film holder.
For high-resolution scanning: Place the film
faced down on the glass surface in the area that
labeled “HIGH RESOLUTION” on the holder.
For transparent film with registration pins scanning:
a) Insert the rail underneath the edge of the glass
film holder, and make sure it’s seated in place.
b) Place the film faced down on the glass
surface, align it with the registration pins on
the rail.
2. Place the vinyl strip on the edges of your
transparency.
3. Pull the transparency tray out a little, then
place the glass film holder into the
transparency tray.
Note: Push the holder back to place, make sure it is
firmly seated in the transparency tray.
4. Gently push the transparency tray back in.
HIGH RESOLUTION mark
Rail
e_2815body.p65 11/9/00, 4:53 PM22