User Guide

12
Adjusting Monitor Display
There are two ways to adjust the monitor screen: auto
adjustment and manual adjustment
Auto Adjustment
1. Power ON the LCD monitor and computer.
2. Press either the “
d ” or “f “ to
display the OSD screen.
3. Select “AUTO SETUP” of OSD
screens by pressing the“
f ”
button for to “AUTO SETUP”.
4. Press the “+” button while
displaying the “AUTO SETUP”
screen.
5. The message “Auto Setup” displays, and auto
adjustment of the monitor is completed in moments.
Manual Adjustment
1. Power ON the LCD monitor and computer.
2. To perform manual adjustment of settings, follow the
procedures outlined in the “Operating Procedure” section
(previous page), and apply the procedures for settings
described in the Menu Table (p. 9).