User Guide

Connecting the Monitor

Warning: Do not operate the LCD monitor with unspecified

power supply. Usage of incorrect voltage will cause

malfunction and may cause fire or electric shock.

1. Turn off your computer and LCD monitor.

2. Use the VGA cable to connect the VGA connector of the LCD

monitor to the VGA port of the computer. Make sure the

cables are securely connected.

3. Plug the DC connector of the adapter to your monitor’s DC

jack.

4. Plug the female end of the power cord into the AC adapter.

5. Connect the male end of the power cord into a wall socket.

6. Turn on your computer, and then turn on your LCD monitor.

Note: For added protection, the use of a Surge Protection

device is recommended. The Surge Protection device should be

installed between the AC Adapter and the electrical wall outlet to

prevent the effects of sudden current variations from reaching

and damaging the LCD monitor.