User Guide

ScanMaker i700 Installing and Getting Started 5
Using the Hi-Speed USB Port
Check first to see if your computer system has Hi-Speed USB or USB 1.1 ports. If
both ports are present, connect the Hi-Speed USB cable to the Hi-Speed USB port
(not to the USB 1.1 port) to obtain faster scanning. If your computer does not have a
Hi-Speed USB port, install a Hi-Speed USB card to make use of the Hi-Speed USB
port; or as an alternative, use the USB 1.1 port instead. For more details on how to
install a Hi-Speed USB card in your computer, please refer to the documentation that
came with your purchased Hi-Speed USB card.
Follow the steps below to make the USB connection.
1. Connect one end of the Hi-Speed USB cable to your computer, and connect the
other end of the cable to the scanner’s USB port.
2. Press the Power button on the front panel of
the scanner, and wait for the lights to stop
blinking and stay on steady.
The scanner will be detected by your system
automatically.
For Mac users
(with a built-in USB port)
For PC users
(with a built-in USB port
or a Hi-Speed USB
card installed)
USB port usually labeled
with the “ ” logo.
Power
button