User Guide

Using the 35mm Filmstrip
Template
1. Push to open the 5-piece 35mm
Filmstrip Template.
2. Place the 35mm filmstrip to be
scanned in the 35mm Filmstrip
Template.
3. Pull to close the 5-piece 35mm
Filmstrip Template.
4. Place the 35mm Filmstrip
Template in the Main Staging
Template, then put this
assembly in the transparency
tray of the scanner.
Using the 6 x 9 cm Film
Template
1. Push to open the 6 x 9 cm Film
Template.
2. Place the film to be scanned in
the 6 x 9 cm Film Template.
3. Pull to close the template.
4. Place the 6 x 9 cm Film
Template in the Main Staging
Template, then put this
assembly in the transparency
tray of the scanner.
Using the 4" x 5" Film
Template
1. Push to open the 4" x 5" Film
Template.
2. Place the films to be scanned in
4" x 5" Film Template.
3. Pull to close the template.
4. Place the 4" x 5" Film Template
in the Main Staging Template,
then put this assembly in the
transparency tray of the scanner.
Note: When the installation is done, you can refer to a separate printed document (Installing and Getting Started or
Step-by-Step Tutorial) included in your scanner package for a more detailed scanning procedures.
a)
b)
c)
a)
b)
c)
a)
b)
c)