User`s manual

7
6. Go to the “General” panel by clicking the General tab in the Settings window. Specify the
settings for your requirements there.
a) If necessary, specify the image settings for the front or
back side of documents separately by using the Sides of
Material control when Scan Source is set as “ADF
(Duplex)”.
b) Select the image type in the Document Type as your input
image type.
– Select Photo to scan color prints.
– Select Text to scan text.
c) If necessary, check “Double Feed”, then select a suitable
paper thickness for the ultrasonic double-feed detection in
the Paper Type options menu to prevent multiple pages
from being fed together while papers are fed through the
ADF.
d) If necessary, check “Auto Document Rotation” to ensure
the scanned images in a readable orientation. When it is
checked, you can select the preferred language used as
an identification in the options menu.
e) If necessary, check “Remove Blank Page” and “Remove Punch Hole” to enhance the
quality of the scanned images.
7. If necessary, go to the “Image Process” panel by clicking the Image Process tab in the
Settings window. Use the image correction tools presented there to enhance the image
quality according to your specific requirements.
8. Click the OK button to close the Scan Setup interface and return to the Main interface of
ScanWizard DI.
9. In the Main interface, click the File Format menu button to select a file format for the
scanned images.
10. In the Main interface, click the File Name menu button to specify a file naming method for
the scanned images.
11. In the Main interface, select and click the Normal Scan button to start scanning.
When done, the scanned images will be automatically saved into the folder defined in the
File Location menu box. At the same time, the scanned images will be displayed in
thumbnail sizes in the Thumbnail View window and labeled with the file name and file
format specified earlier.
12. Click the Open Folder button to locate the scanned images if you want to view.