User`s manual

40 ArtixScan DI 6240S/6250S/6260S & ArtixScan TS 630S User's Manual
Scanning for Card
The scanner can easily convert any hard-copied card into an image and saves it for
viewing or recording purpose.
1. Load the card to be scanned onto the ADF's Document Feed Tray, with the
front side facing up and the top edge directing toward the feeder.
2. Launch ScanWizard DI in stand-alone mode by clicking the program icon on
the desktop.
3. Follow the procedure (steps 3 through 6) for “Scanning a Stack of
Documents” to specify your scanning requirements.
4. Click the Custom Scan button and select Card to open the “Custom Scan-
Card” dialog box.
In the “Custom Scan-Card” dialog box, specify the following settings:
a) Key in your preferred file
name in the “File name” edit
box, or use the default
“Image” as a root file name.
b) Select your required export file
format.
c) Check the “Save multiple
images as a single file” option
to store all the scanned
images as a single file if
desired.
d) Check the “Send document to
application after saving”
option, then choose your
word processing application
from the options.
5. Click the Save button.
When finished, the saved file can
now be opened from your chosen
application and is ready to be
viewed.