User`s manual

28 ArtixScan DI 6240S/6250S/6260S & ArtixScan TS 630S User's Manual
Scanning a Stack of Documents
1. Load the stack of documents to be scanned onto the ADF's Document Feed
Tray.
2. Launch ScanWizard DI (either as a stand-alone by clicking the program icon,
or by using the “File-Import” or “Scan” command from an application
program).
3. Follow the procedure (steps 3a through 3f) for “Scanning a Single-sheet
Document” to specify your scanning requirements in the ScanWizard DI
control panel.
a) Select ADF (Odd Pages), ADF (Even Pages) or ADF (Duplex) as your
image input device in the Scan Source drop-down menu.
– Select ADF (Odd Pages) or ADF (Even Pages) to scan one side of
the document.
– Select ADF (Duplex) to scan both sides of the document.
b) Select your image output type in the Scan Type drop-down menu.
c) Select a dimension in the Paper Size drop-down menu as your preview
image size.
d) Select your desired image output resolution in the Resolution
drop-down menu.
e) If the Auto-crop & Auto deskew option is selected, the scanner
automatically detects the size of the original image, crops the full scan
frame to fit the image, and removes unwanted black borders after the
scan, as well as corrects the distorted image for proper alignment.
f) If necessary, select a level of paper thickness for the ultrasonic double-
feed detection in the Double Feed drop-down menu.
4. If necessary, specify the image settings for the front or back side of papers
separately by using the “Sides of Material” control when the Scan Source is
set as the ADF (Duplex).
5. Select the your image type in the Attribute drop-down menu.
6. If necessary, adjust image quality by using the image correction tools.
7. Click the Scan button, or click the Custom Scan button and select Save to File
to start scanning.
– If ScanWizard DI is launched as a plug-in from an image-editing program,
the scanned image is delivered after the scan to your application, where
the image can be saved, printed, or modified further.
– If ScanWizard DI is launched as a stand-alone program, the scanned
image can be saved after the scan to a file, or opened in an image-editing
program.