User`s manual

ArtixScan DI 6240S/6250S/6260S & ArtixScan TS 630S User's Manual 25
Scanning Documents
Microtek only demos the use of the ScanWizard DI (PC) in succeeding pages in
this guide. For more details about using the ScanPotter (Mac) to scan your
documents, please refer to the ScanPotter Reference Manual in the Microtek
software CD/DVD.
Using ScanWizard DI
ScanWizard DI is a scanning software designed by Microtek for document
scanning in color, black and white, and grayscale in both duplex and simplex
modes. Its user-friendly interface enables you to easily start the scanning process.
Refer to the ScanWizard DI software manual for more details.
Warning:
• Do not place photos or fragile materials in the feed tray, for it will damage
the originals when performing the feeding process.
• Before using the ScanWizard DI, make sure that your anti-virus software
program has been turned off. Otherwise, the scanning speed may be
affected.
The following sections will show you step by step how to use ScanWizard DI.
Scanning a Single-sheet Document
1. Load the single-sheet document to be scanned onto the ADF's Document
Feed Tray.
2. Launch ScanWizard DI (either as a stand-alone by clicking the program icon,
or by using the “File-Import” or “Scan” command from an application
program).
3. Specify your scanning requirements in the ScanWizard DI control panel.
a) Select ADF (Odd Pages), ADF (Even Pages) or ADF (Duplex) as your
image input device in the Scan Source drop-down menu.
– Select ADF (Odd Pages) or ADF (Even Pages) to scan one side of
the document.
– Select ADF (Duplex) to scan both sides of the document.
b) Select your image output type in the Scan Type drop-down menu.
– Select RGB Color (24 bits) to scan the image in color.
– Select Grayscale (8 bits) to scan the image in grayscale.
– Select Black & White (1 bit) to scan the image in black-and-white.
– Select Auto Color Detection to scan the image.